Audio Technica VM520EB/H Headshell/Moving Magnet Phono Cartridge Combo Kit (Black/Blue)

AUDIO TECHNICA VM520EB/H Headshell/Cartridge Combo Kit Headshell/cart

The VM520EB/H combo kit includes the VM520EB elliptical bonded dual moving magnet cartridge premounted on the AT-HS10BK universal 1/2″-mount headshell. The VM520EB is part of the 500 Series in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM520EB is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Includes mounting hardware.

Product Features

Frequency Response 20-23,000 Hz

Channel Separation 27 dB (1 kHz)

Vertical Tracking Force 1.8-2.2 g (2.0 g standard)

Stylus Construction Bonded round shank

Recommended Load Impedance 47,000 ohms

Output 4.5 mV (at 1 kHz, 5 cm/sec)

Channel Balance 1.5 dB (1 kHz)

Stylus Shape 0.3 x 0.7 mil elliptical

Cantilever Aluminum pipe

Mount Half-inch

0

0

0

0

0

0

0

0

0

0

0

0

Type VM Type Montage 1/2′ centres Réponse en Fréquence 20 – 23,000Hz Séparation des Canaux 27dB (1kHz) Equilibre des Canaux en Sortie 1.5dB (1kHz) Tension de Sortie 4.0mV (1kHz, 5cm/sec.) Angle de Piste Vertical 23? Force d’Appui Vertical 1.8 – 2.2g (2.0g standard) Type de Diamant Elliptical Bonded Taille du Diamant 0.3 x 0.7 mil Fixation du Diamant Bonded Round Shank Cantilever (levier porte-pointe) Alumin
ium Pipe Impédance de la Bobine 2,700Ohm (1kHz) Compliance Statique 35 x 10-6 cm/dyne Compliance Dynamique 8 x 10-6 cm/dyne (100Hz) Impédance de Charge Recommandée 47,000Ohm Capacité de Charge Recommandée 100 – 200pF Poids 6.4g Dimensions 17.3 (H) x 17.0 (W) x 28.2 (L) mm Pointe de Lecture de Remplacement VMN20EB Accessoires Fournis Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2, Non-magnetic scr
ewdriver ×1, Brush ×1, Lead wire set ×1